cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4250
Views
0
Helpful
1
Replies

Amp for server

Why we need to disable DFC and Tetra when deploying amp on server..??

1 Accepted Solution

Accepted Solutions

Aaron Woland
Cisco Employee
Cisco Employee

Not required. It's recommended.  Servers are expected to have exponentially more traffic than a traditional endpoint.  Since the server will be so busy, it is really a case by case basis to baseline your servers before and after AMP & note if DFC and or tetra would have a negative impact. 

that's basically why.

View solution in original post

1 Reply 1

Aaron Woland
Cisco Employee
Cisco Employee

Not required. It's recommended.  Servers are expected to have exponentially more traffic than a traditional endpoint.  Since the server will be so busy, it is really a case by case basis to baseline your servers before and after AMP & note if DFC and or tetra would have a negative impact. 

that's basically why.