I have the FMC Virtual Appliance in version 6.2.3 and the FTD in version 6.2.2 an ASA 5506-X with FTD image installed. Whenever I try to do deply in FMC I get this error message:
When I click on details, I have identified that there is a route-map that is applied in the inside interface to the PBR function. Follows logs:
Lina messages FMC >> no strong-encryption-disable FMC >> object network IP_SANDER FMC >> host 126.96.36.199 FMC >> object-group service RDP tcp FMC >> port-object eq 3389 FMC >> timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 FMC >> access-list CSM_FW_ACL_ line 11 remark rule-id 268435456: ACCESS POLICY: Giacomelli_Policy - Mandatory FMC >> access-list CSM_FW_ACL_ line 12 remark rule-id 268435456: L7 RULE: RDP_SANDER FMC >> access-list CSM_FW_ACL_ line 13 advanced permit tcp object IP_SANDER ifc inside object TS_T_3389 object-group RDP rule-id 268435456 FMC >> no user-identity default-domain LOCAL FTD_GIACO >> info : INFO: Default-domain change will not impact existing configurations.
FMC >> no route-map PBR permit 10 FTD_GIACO >> error : ERROR: route-map PBR is attached to routing protocols (EIGRP/RIP/OSPF/BGP/ISIS) or used in policy based routing. Please remove the relevant configuration before removing the route_map
Threat Response Basics
What is Threat Response and how can it help my organization?
What is the cost of Threat Response?
What are the deployment options for Threat Response?
Is Threat Response available outside of the United States?
Gartner has once again named Cisco a Leader in the Magic Quadrant for Network Firewalls. This distinction recognizes Cisco's ingenuity in redefining the firewall as the basis for an integrated security platform.
Find out how Cisco stands out from the comp...
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...