cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to Cisco Firewalls Community


231
Views
5
Helpful
5
Replies
Highlighted
Beginner

Syntax Changes from ASA Version 9.2(4) to ASA Version 9.6.2

We have a few ASAs with Version 9.2(4) that we are looking to upgrade to the latest software version 9.6.2. Are there any concerns I should have in regards to NAT Statements and ACLs between these two? Thanks for the help.

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Cisco Employee

Hi,There are no such changes

Hi,

There are no such changes with NAT and ACL in 9.2.x and 9.6.x. You can directly move to version 9.6.2 after taking the complete backup of your current configuration.

Please find the below document for your reference.

http://www.cisco.com/c/en/us/td/docs/security/asa/asa96/release/notes/asarn96.html#ID-2152-0000000a

The major changes happens with respect to NAT and ACL with version pre 8.3 and post 8.3.


Regards
Pradyumna

VIP Advisor

ok. You won't face any

ok. You won't face any configuration command issue with this migration step.

Thanks

PS: Please don't forget to rate and mark as correct answer if this answered your question


Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question
5 REPLIES 5
VIP Advisor

Hi

Hi

From 9.2 to 9.6, there isn't any changes in need to take into consideration except if you're using Firepower.

Check the release note for firepower changes: http://www.cisco.com/c/en/us/td/docs/security/asa/asa96/release/notes/asarn96.pdf

Thanks

PS: Please don't forget to rate and mark as correct answer if this answered your question


Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question
Beginner

We are using Virtual

We are using Virtual Management Center. Will be upgrading that to 6.1.0. That's the reason for the latest updates on all of our ASAs ahead of time.

VIP Advisor

ok. You won't face any

ok. You won't face any configuration command issue with this migration step.

Thanks

PS: Please don't forget to rate and mark as correct answer if this answered your question


Thanks
Francesco
PS: Please don't forget to rate and select as validated answer if this answered your question
Cisco Employee

Hi,There are no such changes

Hi,

There are no such changes with NAT and ACL in 9.2.x and 9.6.x. You can directly move to version 9.6.2 after taking the complete backup of your current configuration.

Please find the below document for your reference.

http://www.cisco.com/c/en/us/td/docs/security/asa/asa96/release/notes/asarn96.html#ID-2152-0000000a

The major changes happens with respect to NAT and ACL with version pre 8.3 and post 8.3.


Regards
Pradyumna

Beginner

Any other known concerns I

Any other known concerns I should be aware of?