03-29-2018 06:25 AM - edited 02-21-2020 07:34 AM
I have locked down management access to our FMCs and new sensors (4100s) for select IP subnets & ports, I am looking at doing the same thing for our legacy sensors (7120/8250).
I can't seem to locate where you would specify an access control list for the management interface on the sensors.
Is this functionality available on the legacy sensors?
Thanks in advance for your assistance!
Solved! Go to Solution.
03-29-2018 01:30 PM
Issue solved:
I was able to locate the Access List that is used for individual devices - from the FMC:
Go to Devices
Edit the desired device
Device Tab/System - Note the name of the system policy
To modify policy
Devices/Platform Settings - Click to edit the policy in use on the desired sensor.
03-29-2018 01:30 PM
Issue solved:
I was able to locate the Access List that is used for individual devices - from the FMC:
Go to Devices
Edit the desired device
Device Tab/System - Note the name of the system policy
To modify policy
Devices/Platform Settings - Click to edit the policy in use on the desired sensor.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide