Have IPv6 (Dynamic) from Comcast. I am able to get a /60 and need some help with what to do next.
As you can see in the pic, I'm able to route IPv4 via the IP Services on the 3560. That's working well. Now I want to get IPv6 up and running.
In the past I just had the PFSense box running all the routing, and the 3560 was layer 2 only. IPv6 worked fine throughout the system. Now that I'm using the 3560 for layer 3, and the port connected to the PFSense box from the 3560 is routed, I'm not getting IPv6 anywhere on the network.
I'm pretty green when it comes to IPv6. I'm not sure I understand what to do with the /60 I'm getting from Comcast. Since it's not static, I'm hesitant to set up a bunch of static IPv6 addresses on the Cisco Vlans. I could get static IPv4 & IPv6 from Comcast, but it's a significant amount more per month.
If anyone could shove me in the correct direction, I'd very much appreciate it.
