3 nodes ISE deployment

[guest123]

Hello,

I wanted to check whether mix and match of standalone and distributed deployment is still not supported. Does this apply if a third node is to be added to a current standalone pair for PxGrid only?

Appreciate any guidance on following two cases:

First case:

3 x 3595 appliances (single deployment): 2 appliances for Admin/Monitoring/PSN while 3^rd appliance dedicated for PxGrid only (to be able to register more than 2 devices to PxGrid).

Is this a supported model?

Second case:

3 x 3495 appliances (again a single deployment): 2 appliances for Admin/Monitoring/PSN while 3^rd appliance as PSN for Guest Services only.

It has been discussed as not supported multiple times but wanted to see if the following could be a workaround?

Appliance 1: Primary Admin + Primary Monitoring

Appliance 2: Secondary Admin + PSN

Appliance 3: PSN only

Thanks in advance,

Asif

[howon · Accepted solution]

Asif, unfortunately, those are not supported configuration of the setup.

[guest123]

OK. Thanks Hosuk!!