11-13-2013 04:12 AM - edited 03-10-2019 09:05 PM
I have two ACS 5.4 servers that I want to patch
I have updated one server without any issues, however the second server's SSH session timed out before the TFTP completed
I used the following command on the original server
acs patch install patch-name.tar.gpg repository repository-name
The prompt came up to restart the service etc etc
I didn't get this with the second server due to the time outs on the appliance
I am assuming its been installed somewhere on the virtual appliance but I don't know where
And is there a command to installed the patch from the location?
Thanks
Simon
11-16-2013 12:22 AM
hi,
You are following the correct method.
Try using FTP repository instead of TFTP and let me know if you face the same issue.
Thanks,
Prateek
11-20-2013 03:15 AM
I got around this by uploading the image to the local site.
I used TFTP again but on the local subnet and I had no issues
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide