12-04-2004 04:26 AM - edited 03-10-2019 01:54 PM
Hi
Has anyone got this to work?
CNA. (Cisco Networks Assistants) and AAA (Tacacs+) on a 3560 switch.
I cant get the CNA to work in this setup but it works fine on together with 3500XL and 3550 serie switch. With the same parameter.
this is the aaa conf.
aaa authentication login default group tacacs+ local
aaa authentication login no_tacacs enable
aaa authentication enable default enable group tacacs+ none
aaa authorization exec default group tacacs+ local
aaa authorization exec no_tacacs none
aaa authorization commands 15 default group tacacs+ if-authenticated local
aaa authorization commands 15 no_tacacs none
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting network default start-stop group tacacs+
ip http server
ip http authentication aaa
12-09-2004 12:54 PM
Did you get any error messages on this?
12-10-2004 12:23 PM
Hi
No. I get the prompt for username and password.
and hit enter. Then nothing happens. It looks like it's trying to build the network but it never get fines. I know it works without the aaa statement. But I cant live with that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide