cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
618
Views
0
Helpful
4
Replies

AAA configuration using 2000 IAS

berwal1916
Level 1
Level 1

i want to configuring AAA accounting using local database on cisco 2511 with the help of 2000 IAS(radius server).

4 Replies 4

Richard Burts
Hall of Fame
Hall of Fame

Parveen

It may be that I do not fully understand what you are attempting to do. But I do not know of any way to do aaa accounting using the local database on 2511. It is possible to authenticate and to authorize using the local database. But as far as I know to do accounting requires database on the server.

HTH

Rick

HTH

Rick

then how can i do the accounting status of user in my local database in that router 2511. is there any way to find the called telephone from remote site that access the resource of whole day

another question: how can we restricted that the client can canot access the network from two location at the same time / or how can we restricted the user that he can only dialed from the particular telephone number

Parveen

If you have an external Radius server you can do aaa accounting where you send the accounting records to the external server. I see difficulty trying to do accounting to internal database of router but not to external server. Once the accounting records are on the external server, then you can report on them, extract from them to get data that you might need for resource reporting.

If you want to restrict access to a single session and if you are running Radius on the server then you can do aaa authentication to the server. On the server you should be able to configure whatever restrictions that you need.

HTH

Rick

HTH

Rick

please give me the details how we configure the accounting of local database to radius server(2000 IAS)

in detals steps