ACS 3.3.2 SE HTML using ssl

[sjaworsk]

There is a problem with the certificate I used for enabling the https option, Now I cannot access the web interface. I am not getting prompted with a certificate. If I use http it automatically goes to https. There are no options for reseting the html interface from the command line. Are there any backdoors or workarounds?

[didyap]

Here is a document that explains how to set up the Cisco Secure ACS Solution Engine (SE) for HTTPS management.

http://www.cisco.com/en/US/products/sw/secursw/ps5338/products_configuration_example09186a008020a45c.shtml

[jacquaro]

I am also having the above problem, the issue is that once the ACS is rebooted you no longer can get access to the webpage http or https... so i cannot possibly follow the instuctions you have provided for setting up the HTTPS management being i am locked out of my ACS. I have a call open with tech support so i will post the results

[jacquaro]

For anyone else with a Cisco appliance having this issue they are going to have to open a TAC case and request the GUI logon patch. This patch allows you to login to the windows OS which is running on the appliance and you then can fire up the registry editor and change the HTTPS support to 0. This fixed my problem without a re-install.