05-02-2013 02:11 AM - edited 03-10-2019 08:23 PM
Hello.
I'm trying to configure ACS 5.4 as radius server for network access (PPP connections).
In monitoring and reports the users have green color , but the clients cannot
send data. Auth method is CHAP/MD5.
Does anybody have any idea of what's could be wrong?
Allowed protocols are set to CHAP and PAP only.
regards
bjornar
05-02-2013 06:36 AM
Hi,
Are you using Active Directory as identity store?
Regards
Anubhav.
05-02-2013 10:52 PM
No, I'm using internal users.
05-03-2013 02:25 AM
We are using MC75A terminals. The terminal says wrong username and password, but the user has green color in the ACE log.
Using the following ios radius statements on the NAS:
aaa authentication ppp default group radius local
aaa authorization network default group radius local
radius-server host x.x.x.x auth-port 1645 acct-port 1646
radius-server key 7 XXXX
Works fine with the old tacacs server.
regards
bjornar
05-06-2013 05:30 AM
removing: aaa authorization network default group radius local, solved the issue.
05-06-2013 11:23 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide