acs PEAP-TLS authentication

[ELKHATTABI]

hi,

actually i use ACS 5.8 as NPS server For my Computer using Certificate issued by AD CS. so i need to know what's the allowed protocols  that must be activated on my ACS to permit computer authentcation pass by PEAP-TLS

thanks.

[Gagandeep Singh]

You can Allow PEAP with inner methods : Allow EAP-TLS.

Under Access policy > Default Device admin > Allowed protocols.

Regards

Gagan

ps : rate if it helps!!!!

[ELKHATTABI]

Hi,

thank you for your request, my computer with windows 7  use EAP-MSCHAP V2 as mode authentification so how it can communicate with the ACS i guess that i must allow EAP-MSCHAP V2 too under PEAP!!

i need to know howa can i verify if my computer is authentified by certification process?

[Gagandeep Singh · Accepted solution]

Yes, you need to select MSCHAPv2 as inner method for PEAP-MSCHAPv2.

Regards

Gagan

PS : rate as correct if it helps!!!!