10-25-2008 12:40 AM - edited 03-10-2019 04:09 PM
Hi I have ACS v4 and it has a replication server. My problem as follows.
1) Due to some reason the ACS service on primary stop - how do I get to know the reason
2)Also during this time the AAA requests are not going to my replication server - what can be the reason?
Please Advice
10-25-2008 06:58 AM
1) If service gets stop then most likely acs is running on unsupported operating system. ACS 4.0 is not supported with win2003 SP2. Let me know the OS and SP you have ?
2)Please get debug from any IOS device. That will show why it is not trying second acs.
debug aaa athentication
debug tacacs/radius (which ever applicable)
Also attach your aaa config
Regards,
~JG
10-25-2008 09:22 PM
hi tks for the reply
1) it is runnig on windows 2003 R2 SP1
Does it support ACS v4.0
2) Will attach you the config and the debug.
10-26-2008 09:22 AM
R2 is not supported. Also how many processors do you have on 2003 server ?
Please send the debugs and package.cab from acs.
Let me know if you don't have steps to generate package.cab.
Regards,
~JG
10-26-2008 10:19 PM
hi
it has only 1 processor and below is the config
radius-server host PRIMARY RADIUS IP auth-port 1645 acct-port 1646
radius-server host SECONDARY RADIUS IP auth-port 1645 acct-port 1646 key 7
radius-server vsa send accounting
radius-server vsa send authentication
And also I have requested the debug output from network eng.
can you help me on how to create package.cab
regards
muralee
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide