- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-28-2013 05:01 AM - edited 03-10-2019 08:56 PM
Hello,
Can anyone send me the link on- how to configure Micrsoft Client certificate based authentication using ISE as the AAA/Radius Server.
Thanks,
Solved! Go to Solution.
- Labels:
-
AAA
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-30-2013 02:16 AM
hI Imran,
If I understand right then you need this attached document:
Hope it helps.
Regards
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-30-2013 02:16 AM
hI Imran,
If I understand right then you need this attached document:
Hope it helps.
Regards
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
09-30-2013 09:26 PM
Hi Imran,
Certificates are used in a network to provide secure access. Certificates are used to identify Cisco ISE to an endpoint and also to secure the communication between that endpoint and the Cisco ISE node. Certificates are used for all HTTPS communication and the Extensible Authentication Protocol (EAP) communication.
For step by step configuration and information, please visit this link:
http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_man_cert.html
