04-06-2020 07:05 AM
Hello everyone ,
We have a problem with schedule back up on ISE
We have Cisco ISE 2.3 Patch5 and the error we get is the below :
Sun Apr 5 05:00:35 EEST 2020: backup Weekly-CFG10-200405-0500.tar.gpg to repository SFTPBKP: failed - Error: The data filesystem is 71 percent full, which is above threshold of 70. Backup aborted
show disk output is below :
nacintmgmt1/admin# sh disks
disk repository: 1% used (45100 of 30106488)
Internal filesystems:
/ : 69% used ( 9721672 of 14987616)
/dev : 0% used ( 0 of 8124196)
/dev/shm : 0% used ( 0 of 8134208)
/run : 1% used ( 872 of 8134208)
/sys/fs/cgroup : 0% used ( 0 of 8134208)
/storedconfig : 2% used ( 1589 of 95054)
/boot : 23% used ( 103882 of 487634)
/tmp : 1% used ( 6964 of 1983056)
/opt : 71% used ( 395241012 of 593333176)
/run/user/440 : 0% used ( 0 of 1626844)
/run/user/301 : 0% used ( 0 of 1626844)
/run/user/321 : 0% used ( 0 of 1626844)
/run/user/0 : 0% used ( 0 of 1626844)
/run/user/304 : 0% used ( 0 of 1626844)
/run/user/303 : 0% used ( 0 of 1626844)
/run/user/322 : 0% used ( 0 of 1626844)
all internal filesystems have sufficient free space
Is there any workaround to solve this ?
Thank You,
Palaiologos
04-06-2020 09:08 AM
- What about the available space in the target repositiory ?
M.
04-06-2020 09:49 AM
As the owner inform me is not full .
Is there any command i can find it from ISE cli ?
04-06-2020 11:16 PM
There is no command in the ISE CLI to check the storage usage/space on an external repository.
There may be quotas on the external server for the folder or user account used for the backup, so you might need to confirm further with the system owner.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide