02-20-2014 06:39 AM - edited 03-10-2019 09:25 PM
Hello,
I am trying to configure Cisco ISE as radius server for authentication of wireless clients (for network access).
I have configure the WLC to forward the authentication requests to ISE server and configure the account on ISE server with the relevant
group but I can't seem to authenticate.
I need to do this using Layer 3 Web authentication feature on WLC, i.e. client connects using open authentication and
open a web page which leads to a web authentication page on WLC which then forwards the user credentials to ISE
for authentication.
Is there a configuration guide I can find for this scenario ?
Thanks in advance
Jabran Zahid
02-21-2014 01:28 AM
yes check cisco How to guides for ISE they are very userfull
if you find the reply helpful do rate it
02-21-2014 02:11 AM
Thanks for reply but I have not been able to find a guide for ISE server radius configuration. Can anyone please point me to a relevant link.
02-21-2014 03:12 AM
you can download the guide from the link given
Note:
If you find the reply helpful do rate it
02-21-2014 03:20 AM
There is a whole bunch of guides in that link. If I could get a little bit specific reply to my question, that would be helpful.
thanks
02-24-2014 09:08 AM
Could you not use the guest portal on the ISE?
To set it up your way is just a longwinded. But I have the same kind of setup, for one of my older controllers.
What do your Authentication logs on your ISE say? Is it even reaching the ISE?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide