cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3549
Views
0
Helpful
1
Replies

Cisco ISE - Wireless Certificate Based Authentication

I have an issue on Cisco ISE VM 2.3, after renewing the attached certificate, wireless users can't authenticate and we get the following log;

22045 Identity policy result is configured for password based authentication methods but received certificate based authentication request.

 

So, how to change the authentication type to be certificate based authentication instead of password, I tried to find it on the ISE GUI but I couldn't find it.

 

Thanks

1 Reply 1

poongarg
Cisco Employee
Cisco Employee
Refer below document:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/214975-configure-eap-tls-authentication-with-is.html
Check under the Identity Source Sequence called under the authentication policy for wireless users, if certificate authentication profile is unchecked.