Configuring EZVPN Server with rsa-sig authentication

[ldimitrov]

Hi guys,

could you tell me, how to configure my EZVPN Server to work with rsa-sig authentication. It work perfect with pre-share. Is it possible to tork with RSA authentication. I'm using Cisco VPN Client at EZVPN Remote appliance.

See attachments for more info. It's a current configuration.

[#2]

The router acting as the IPSec remote router must create an Easy VPN remote configuration and assign it to the outgoing interface.

Perform these steps to create the remote configuration, beginning in global configuration mode:

http://www.cisco.com/en/US/products/ps5853/products_configuration_guide_chapter09186a00804582da.html#wp1005445