DEFAULT RULE FOR ISE POLICY

[palanjay4real]

Hi All,

Please I recently created a policy to put devices that are 1. Compliance_Unknown_Devices 2. Non_Comliant_Devices be moved to Cisco_Temporary_Onboarding.

I however need hep to know where I can check the default setting for these rules i.e Compliance unknown, non compliance and Cisco temporary onboading.  Please can some help me with the path to see the default setting, Please.

My ISE version is 2.4

[Marcelo Morais]

Hi @palanjay4real ,

 at Work Centers > Posture > Reports > Reports > Posture Reports > Posture Assessment by Endpoint, you are able to check the Status of an Endpoint (Compliant, NonCompliant and Pending).

 at Operations > RADIUS > Live Logs > Posture Status, you also are able to check the Status of an Endpoints. 

Hope this helps !!!

[Dustin Anderson]

compliant and unknown would depend on what you are checking against and with, are you talking posture with AnyConnect, or checking a mobile device via a MDM. I don't know of any default setting and see nothing in my unit. you may need to give more info or examples/screenshots.