I have configured download acl in a Acs 3.2 for apply it in the 3750 with 802.1x at the ports. The authentication 802.1x is working fine but I am not getting downloadable acl from the acs.
I am getting the next debugs:
Received QUEUE EVENT in response to AAA Request
Dot1x matching request-response id 39 found
Length of recv eap packet from radius = 4
dot1x-ev:Received VLAN Id 31
dot1x_bend Gi1/0/3: during state dot1x_bend_response, got event 3(afail)
dot1x_bend Gi1/0/3: dot1x_bend_response -> dot1x_bend_fail
Dot1x Failure State Entered
dot1x-ev:dot1x_bend_fail_enter:0008.0d96.e5d8: Current ID=27
dot1x-ev:dot1x_bend: Sending Radius Response to Supplicant of length 4
dot1x-ev:Transmitting an EAPOL frame on GigabitEthernet1/0/3
dot1x-packet:Tx EAP-Failure, id 27, ver 1, len 4 (Gi1/0/3)
Do you have any idea ?
