01-08-2011 09:46 AM - edited 03-10-2019 05:42 PM
Hello
I have downloadable ACLs going to 4500 and 3750 series switches. from the ACS 5.2 I can see when a ACL is downloaded and that is fine, and from the switch I can check for the Downloadable ACL name.
My question is how do I check the dACL to see to whom it was applied and any other available detail,, FROM THE SWITCH?
I know show access-lists shows me the ACL,,, but I could have the same ACL applied to many differnt users on the same switch and I am looking for a way to validate, from the switch which users the ACL was applied to.
thanks in advance.
Solved! Go to Solution.
01-09-2011 02:35 PM
Try this:
show ip access-list interface
Regards
Jatin
~Do rate helpful posts.
01-09-2011 02:35 PM
Try this:
show ip access-list interface
Regards
Jatin
~Do rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide