cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
17479
Views
0
Helpful
4
Replies

EAP-TLS Authentication failing for clients in ISE

Karry
Level 1
Level 1

 Hi ,

 

Can someone help with the below logs . Client authentication is failing EAP-FAST with inner method has EAP-TLS. Pls let me know what needs to be configured to get it work.

 

Overview

Event    5434 Endpoint conducted several failed authentications of the same scenario

Username           host/anonymous

Endpoint Id        F0:92:1C:E6:0C:69

Endpoint Profile             

Authentication Policy    TEST-WIRED >> TEST-WIRED-DOT1X

Authorization Policy      TEST-WIRED

Authorization Result     

 

Authentication Details

Source Timestamp          2018-05-15 14:20:58.673

Received Timestamp     2018-05-15 14:20:58.674

Policy Server     PSN202

Event    5434 Endpoint conducted several failed authentications of the same scenario

Failure Reason  12529 Inner EAP-TLS authentication failed

Resolution          Verify that the client supplied the correct credentials, such as username and password. Also verify that both ISE and the Device are properly configured to use the same shared secret. Finally, check the previous Steps in the Log for this EAP-based conversation for any message that might hint why the authentication failed.

Root cause          EAP-TLS authentication for the inner EAP method failed.

Username           host/anonymous

Endpoint Id        F0:92:1C:E6:0C:69

Audit Session Id               0A1730640000001500B6CDB2

Authentication Method                dot1x

Authentication Protocol               EAP-FAST (EAP-TLS)

Service Type      Framed

Network Device               ISE-test

Device Type       All Device Types#TEST-Switches

Location               All Locations#LOCAL

NAS IPv4 Address            10.23.48.100

NAS Port Id         GigabitEthernet1/0/5

NAS Port Type   Ethernet

 

Other Attributes

ConfigVersionId               30

Device Port        1645

DestinationPort               1812

RadiusPacketType           AccessRequest

Protocol               Radius

NAS-IP-Address               10.23.48.100

NAS-Port             50105

Framed-MTU     1500

State     37CPMSessionID=0A1730640000001500B6CDB2;37SessionID=PSN202/315600251/390;

IsEndpointInRejectMode             false

NetworkDeviceProfileName      Cisco

NetworkDeviceProfileId              b0699505-3150-4215-a80e-6753d45bf56c

IsThirdPartyDeviceFlow               false

RadiusFlowType              Wired802_1x

SSID       00-3A-7D-E3-62-85

UserName          host/TESTMACHINE.abc.com

AcsSessionID     PSN202/315600251/390

UseCase               Eap Chaining

IdentityPolicyMatchedRule        TEST-WIRED-DOT1X

Serial Number  2B 00 00 01 57 C7 69 82 DD 60 BB BA 5D 00 00 00 00 01 57

Subject - Common Name             TESTMACHINE

Subject Alternative Name           TESTMACHINE.abc.com

Subject - Organization Unit         Quarantine

CPMSessionID   0A1730640000001500B6CDB2

EndPointMACAddress   F0-92-1C-E6-0C-69

EapChainingResult          User and machine both failed

ISEPolicySetName           TEST-WIRED

IdentitySelectionMatchedRule TEST-WIRED-DOT1X

StepData             4= DEVICE.Location

StepData             5= DEVICE.Device Type

StepData             124=certificate for TESTMACHINE

StepData             125=certificate for TEST Issuing CA 1

StepData             143= Normalised Radius.RadiusFlowType

TLSCipher            ECDHE-RSA-AES256-SHA

TLSVersion         TLSv1

DTLSSupport      Unknown

Subject CN=TESTMACHINE

OU          Quarantine

DC          abc.com

DC          com

Subject Alternative Name - DNS               TESTMACHINE.abc.com

Issuer    CN=TEST Issuing CA 1

O             TEST

C             AE

Issuer - Common Name                TEST Issuing CA 1

Issuer - Organization      TEST

Issuer - Country                AE

Subject - Domain Component    abc.com

Subject - Domain Component    com

Key Usage           0

Key Usage           2

Extended Key Usage - Name      130

Extended Key Usage - OID           1.3.6.1.5.5.7.3.2

Template Name               1.3.6.1.4.1.311.21.8.11764840.15777674.10176389.3258717.3562784.131.13738302.3159053

Days to Expiry   729

AKI         f7:bc:73:1d:dd:28:36:63:3b:37:c7:fc:e7:7d:89:a4:e8:c5:8f:e8

Network Device Profile                Cisco

Location               Location#All Locations#LOCAL

Device Type       Device Type#All Device Types#TEST-Switches

IPSEC     IPSEC#Is IPSEC Device#No

Called-Station-ID             00:3A:7D:E3:62:85

CiscoAVPair       service-type=Framed

audit-session-id               0A1730640000001500B6CDB2

method                dot1x

 

Result

RadiusPacketType           AccessReject

 

Session Events

2018-05-15 14:20:58.187                Authentication failed

              

Steps

               11001    Received RADIUS Access-Request

               11017    RADIUS created a new session

               15049    Evaluating Policy Group

               15008    Evaluating Service Selection Policy

               15048    Queried PIP

               15048    Queried PIP

               11507    Extracted EAP-Response/Identity

               12100    Prepared EAP-Request proposing EAP-FAST with challenge

               12625    Valid EAP-Key-Name attribute received

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12102    Extracted EAP-Response containing EAP-FAST challenge-response and accepting EAP-FAST as negotiated

               12800    Extracted first TLS record; TLS handshake started

               12174    Received Machine PAC

               12805    Extracted TLS ClientHello message

               12806    Prepared TLS ServerHello message

               12801    Prepared TLS ChangeCipherSpec message

               12802    Prepared TLS Finished message

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12804    Extracted TLS Finished message

               12816    TLS handshake succeeded

               12132    EAP-FAST built PAC-based tunnel for purpose of authentication

               12209    Starting EAP chaining

               12218    Selected identity type 'User'

               12125    EAP-FAST inner method started

               11521    Prepared EAP-Request/Identity for inner EAP method

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12213    Identity type provided by client is not equal to requested type

               12215    Client suggested 'Machine' identity type instead

               11522    Extracted EAP-Response/Identity for inner EAP method

               11806    Prepared EAP-Request for inner method proposing EAP-MSCHAP with challenge

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12523    Extracted EAP-Response/NAK for inner method requesting to use EAP-TLS instead

               12522    Prepared EAP-Request for inner method proposing EAP-TLS with challenge

               12625    Valid EAP-Key-Name attribute received

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12524    Extracted EAP-Response containing EAP-TLS challenge-response for inner method and accepting EAP-TLS as negotiated

               12800    Extracted first TLS record; TLS handshake started

               12805    Extracted TLS ClientHello message

               12806    Prepared TLS ServerHello message

               12807    Prepared TLS Certificate message

               12808    Prepared TLS ServerKeyExchange message

               12809    Prepared TLS CertificateRequest message

               12527    Prepared EAP-Request for inner method with another EAP-TLS challenge

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12526    Extracted EAP-Response for inner method containing TLS challenge-response

               12527    Prepared EAP-Request for inner method with another EAP-TLS challenge

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12526    Extracted EAP-Response for inner method containing TLS challenge-response

               12527    Prepared EAP-Request for inner method with another EAP-TLS challenge

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12526    Extracted EAP-Response for inner method containing TLS challenge-response

               12527    Prepared EAP-Request for inner method with another EAP-TLS challenge

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

                11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12526    Extracted EAP-Response for inner method containing TLS challenge-response

               12527    Prepared EAP-Request for inner method with another EAP-TLS challenge

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12526    Extracted EAP-Response for inner method containing TLS challenge-response

               12527    Prepared EAP-Request for inner method with another EAP-TLS challenge

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12526    Extracted EAP-Response for inner method containing TLS challenge-response

               12527    Prepared EAP-Request for inner method with another EAP-TLS challenge

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12526    Extracted EAP-Response for inner method containing TLS challenge-response

               12571    ISE will continue to CRL verification if it is configured for specific CA

               12571    ISE will continue to CRL verification if it is configured for specific CA

               12811    Extracted TLS Certificate message containing client certificate

               12812    Extracted TLS ClientKeyExchange message

               12813    Extracted TLS CertificateVerify message

               12804    Extracted TLS Finished message

               12801    Prepared TLS ChangeCipherSpec message

               12802    Prepared TLS Finished message

               12816    TLS handshake succeeded

               12509    EAP-TLS full handshake finished successfully

               12527    Prepared EAP-Request for inner method with another EAP-TLS challenge

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12526    Extracted EAP-Response for inner method containing TLS challenge-response

               61025    Open secure connection with TLS peer

               15041    Evaluating Identity Policy

               15048    Queried PIP

               12529    Inner EAP-TLS authentication failed

               11520    Prepared EAP-Failure for inner EAP method

               12117    EAP-FAST inner method finished with failure

               22028    Authentication failed and the advanced options are ignored

               12967    Sent EAP Intermediate Result TLV indicating failure

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12218    Selected identity type 'User'

               12125    EAP-FAST inner method started

               11521    Prepared EAP-Request/Identity for inner EAP method

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               12213    Identity type provided by client is not equal to requested type

               12216    Identity type provided by client was already used for authentication

               12967    Sent EAP Intermediate Result TLV indicating failure

               12105    Prepared EAP-Request with another EAP-FAST challenge

               11006    Returned RADIUS Access-Challenge

               11001    Received RADIUS Access-Request

               11018    RADIUS is re-using an existing session

               12104    Extracted EAP-Response containing EAP-FAST challenge-response

               61025    Open secure connection with TLS peer

               12108    EAP-FAST authentication failed

               11504    Prepared EAP-Failure

               11003    Returned RADIUS Access-Reject

               5434       Endpoint conducted several failed authentications of the same scenario

1 Accepted Solution

Accepted Solutions

I've double checked this in my lab.

 

Do you have a Certificate Authentication Profile defined? And referenced in the Authentication Policy? This is what I have:-

 

Capture.PNG

 

I have the same NAM profile configuration as you and with the above configuration I can successfully authentication.

 

HTH

View solution in original post

4 Replies 4

Hi,
Does the user and computer have a certificate issued by the Certificate Authority? Does ISE have this CA certificate in it's trusted root store?

Can you upload the AnyConnect profile as an attachment, so I can have a look and see how it's configured?

We have Only machine certificate on client side which is assigned by our Domain CA.

Yes I have imported all the root & intermediate certificate in Trust certificate store in ISE.

 

Also Attaching the XML file.

I've double checked this in my lab.

 

Do you have a Certificate Authentication Profile defined? And referenced in the Authentication Policy? This is what I have:-

 

Capture.PNG

 

I have the same NAM profile configuration as you and with the above configuration I can successfully authentication.

 

HTH

Thanks Everyone .

 

Authentication is working now. Problem was with certificate generated from the domain CA. Have reissued the certificate from the domain CA for the machine. After which EAP-TLS certificate authentication started working for the client.