cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1417
Views
0
Helpful
3
Replies
Highlighted

enable view command

Hello,

I just want to know if the command "enable view" requires AAA configuration in IOS 12.3 release or only password.

Appears tthat in 12.4 release, AAA configuration is required as you can see

NR-2851-2#enable view
% AAA must be configured.

Thank you for your help on this subject.

3 REPLIES 3
Highlighted
Rising star

Yes, it looks like AAA

Yes, it looks like AAA configuration is required in ios 12.3 release.

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gtclivws.html#wp1051869

 

 

Prerequisites

Before you create a view, you must perform the following tasks:

Enable AAA via the aaa new-model command. (For more information on enabling AAA, see the chapter "Configuring Authentication" in the Cisco IOS Security Configuration Guide, Release 12.3.

Ensure that your system is in root view—not privilege level 15.

Many thanks for this fast

Many thanks for this fast answer and help. Now it is ok how to use this feature whith the relevant informations you provide. Once again, thank you.

Highlighted
Rising star

Your welcome!

Your welcome!