cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
184
Views
4
Helpful
1
Replies

Enterprise Users - How are you using ISE?

rvandolson
Level 1
Level 1

Wanted to get a feel as to how those of you in the Enterprise space (maybe 1000+ employees) are using ISE.  Primarily for guests?  Special network needs or have you rolled it out to every port on your network?

Am evaluating various deployment scenarios and considering the associated pain that might go along with each.  Potentially could start with a simple "trusted" device vs. "un-trusted" device where "trusted" means there are valid credentials provided PLUS an org provided certificate installed on the machine and provided during authentication.  That might be too cumbersome, however and could look at just checking for the presence of a registry key or equivalent depending on the platform.  This would still be messy with mobile devices I assume, but might be a good starting point.

Interested to hear how those of you are using ISE In the wild, however.

1 Reply 1

zdesignstudio
Level 4
Level 4

Guest access and posture assessment. We also use it for dynamic switch port configuration after assessment takes place. This is because we have a bunch of VLAN specific devices that dont move around too much but they do move aroudn and it take a lot of work away from the administrators to reconfigure a switch port to account for a new device on a new VLAN.

Please rate useful posts and mark answers as correct if applicable.

Please rate useful posts and mark answers as correct if applicable.