cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

430
Views
5
Helpful
5
Replies
Highlighted
Participant

How to configure SYSLOG in ISE

3CDAEMON.pngLOGGING-CATEGORIES.pngTARGET.png

 

I'm doing the SYSLOG test.

I set up as above, but no LOG is collected.

Have I missed anything??

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

I just did it with 3CDaemon, too and it worked just fine (below).

Looking at your Remote Logging Target configuration, it appears you set the remote syslog port to 1111 which is not the standard syslog port 514. That is my bet.

image.png

View solution in original post

5 REPLIES 5
Highlighted
VIP Advisor

Hi,

Under administration- system - settings you should configure remote syslog
server.


***** please remember to rate useful posts
Highlighted

20210125_211002.png

 

I can't find any information related to syslog in the menu you said.

What should I do?

Highlighted

Hi,

Sorry go to loggin tab, *Administration > System > Logging > **Remote
Logging Targets*. There you add your syslog server.

**** please remembers to rate useful posts
Highlighted

Please check the screenshot above.

I specified the target with the name TEST.

Highlighted
Cisco Employee

I just did it with 3CDaemon, too and it worked just fine (below).

Looking at your Remote Logging Target configuration, it appears you set the remote syslog port to 1111 which is not the standard syslog port 514. That is my bet.

image.png

View solution in original post

Content for Community-Ad