i m getting user rejection

[Ibrahim Jamil]

Hello Guys

pls see attachment

i m getting user rejection , whats wrong i have done on the allow policy i have created instead of the default policy with denyAccess

thanks

[ajc]

check this.

https://nat0.net/cisco-cli-access-using-radius-and-ise/

[Ibrahim Jamil]

Hi

Thanks for ur reply

why its end up in the default policy with denyAccess , why it didn't pick the specified rule for this login

kindly have a look to the attachment

thanks

[ajc]

Go to live logs and take an screenshot about the details on the failed connection.

[Ibrahim Jamil]

Hi

Attached

see , it works if i change the denyAccess to internal user in the Default rule

thanks

[Rob Ingram]

If it is not hitting the rule it is probably because the rule is incorrect. I think you need to try - Radius:NAS-Port-Type

[Ibrahim Jamil]

thanks rji

[ajc · Accepted solution]

I sent you a msg, try changing the rule you created as suggested

[Ibrahim Jamil]

Thanks Abraham for solving my issue

Thanks all