cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
717
Views
2
Helpful
1
Replies

ISE 2.2 Crashing with Dashes in Certain Spots

paul
Level 10
Level 10

Working on a fresh 2.2 Patch 1 deployment and we are seeing some odd behavior in certain spots in ISE.  I normally use underscores in my naming convention in ISE as I know underscores are allowed on all screens (well not the purge policy names but don't get me started on that).  Dashes are allowed on most screens but not all.  This customer wants to use dashes even though I cautioned them on using it.

Periodically when the customer is modifying profiling policies with dashed in them the application server service will restart.  The browser just hangs that and if you go to the CLI you can see the service is initializing.  I saw this today on a Webex with them when working on an Endpoint Identity Group.  I created the group with an underscore out of habit, Paul_Whitelist.  I saved it and everything was fine.  They reminded me of their use of dashes.  I clicked on the group, changed to a dash, Paul-Whitelist, clicked save and service crashed.

Is this a known issue.  Doesn't always happen. 

Thanks.

1 Accepted Solution

Accepted Solutions

kthiruve
Cisco Employee
Cisco Employee

Hi Paul,

If it is a live deployment, please reach out to TAC and open a defect. Looks like a new issue to me.

-Krishnan

View solution in original post

1 Reply 1

kthiruve
Cisco Employee
Cisco Employee

Hi Paul,

If it is a live deployment, please reach out to TAC and open a defect. Looks like a new issue to me.

-Krishnan