ISE 2.3 ssh stopped functioning

[gmaddux11]

I've got an 8 node distributed deployment - I am only able to ssh to primary pan node currently.  Previously I had been able to ssh to each node and use the local account we have setup on the node.

Anyone else having this problem, and a fix?

[Jason Kunst]

Would recommend contacting the tac about troubleshooting

[Craig Hyps]

As a quick check, make sure SSHD service is still enabled on the other nodes.  You can go to console and verify 'service sshd enable' is present.  You could also try disabling and re-enabling.  Although it should not be needed, you could also try app restart or even reload.  Make sure node is listening on tcp 22 via "show ports | include 22".

[gmaddux11]

I should mention - this all seemed to have broke after applying patch 2 to my current version - 2.3.0.298........

I am able to ssh to each node and get prompted to login - once using the credentials that worked previous to applying patch 2, now i get "Password authentication failed.  Please verify that the username and password are correct."

SSH is working.......Authentication is not......after patch 2 application

[Jason Kunst]

Would recommend you work through tac if this is urgent