cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
187
Views
2
Helpful
2
Replies

ISE fail to upload the patch and upgrade files

MonkeyBear007
Level 1
Level 1

 

I successfully uploaded ise-patchbundle-3.3.0.430-Patch7-25070414.SPA.x86_64.tar.gz to ISE1, but cannot upload it to ISE2 via the web GUI despite multiple attempts in the ISE trial lab.

anybody what can be the problem?

MonkeyBear007_0-1763073989037.png

 

MonkeyBear007_1-1763074015145.png

 

2 Replies 2

@MonkeyBear007 if you are install the ISE patch via the CLI on each node, you upload the patch file to the repository and then install 

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/215406-patch-installation-on-ise-and-faq-durin.html#toc-hId-689312512 

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-software/215348-how-to-configure-repository-on-identity.html

When you patch ISE from the web GUI, you initiate the patch install from the Primary PAN, it will then automatically install on the other ISE nodes.

 

Hi @MonkeyBear007 ,

 at Administration > System > Maintenance > LocalDisk Management:

Local Disk Management.png

 

are you unable to Upload the Patch ?

 

Hope this helps !