ISE profilling - profiled endpoint with mixup device type

[yong khang NG]

Hi all,

i  have a very messy report on ISE proiled endpoints dashboard. The ISE device sniff a mixture profiled endpoint.

My question

If refer to the topology diagram, Is it causeed by the WLC uplink trunk port to L3 switch?

Beside wireless 802.1x authenticaiotn, can ISE also sniff on normal WPA2 wireless authentication? Does ISE support on WPA2 authentication anyway? in the condition of not using ISE local user ads identity source.

Thanks

Noel

[sahseth]

Please find below Cisco Link:

http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_prof_pol.html

http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_prof_pol.html

http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_30_ise_profiling.pdf