08-17-2017 08:52 AM
Hi All
I am working on a guest solution where I have got 3x SSID's and 3x splash pages hosted on ISE.
When I switch my client from SSID1 to SSID2, I still get splash page for SSID1. And same happens with SSID3 or vice versa.
Has anyone have got similar issue or is it just me.
I have noticed that after disconnecting client from wireless and client session timeout on WLC - all works ok but this only happens if you switch instantaneously.
I have got only one MAB condition for wireless MAB and 3 different authorization profiles that I am using with Calling station ID[30] to match each SSID.
Many thanks
Solved! Go to Solution.
08-18-2017 04:04 PM
This could be page caching issue.
08-17-2017 09:52 AM
Make sure you are specifying the correct authorization result that has the portal you want to the SSID in authorization policy. Depending on the version of ISE you have, you can use "Normalized RADIUS:SSID" to ensure traffic from that SSID will get the correct authorization result.
Regards,
-Tim
08-18-2017 04:04 PM
This could be page caching issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide