ISE version 2

[Muthukumar P]

Hi,

      We have ISE version 2 and WLC 5500. how configured  guest user authenticaion in ISE as well WLC 5500. Please help me on this..

Thanks

Muthukumar

[salman abid]

Hi Muthukumar,

Check if below can help you to setup guest access with ISE 2.0

http://www.cisco.com/c/en/us/td/docs/security/ise/2-0/admin_guide/b_ise_admin_guide_20/b_ise_admin_guide_20_chapter_01110.html

Or

http://www.cisco.com/c/dam/en/us/td/docs/security/ise/how_to/HowTo-93-ISE_20_Wireless_Guest_Setup_Guide.pdf

regards

salman

[Muthukumar P]

Hi Salman,

                      For sms  purpose we have to put a new server of we can use ISE also.. suppose we are going to configure new server for this service please share per-requisite details asap..

Customer is having  BSNL ISP for internet.. we can use same ISP G/W for the SMS G/W configuration..

or we have inform to BSNL for the same..Please suggest..

Thanks

Muthukumar

[Muthukumar P]

Hi Salman,

                      If you have any document please share it asap since customer is asking same only .. please do it... We need to be submit the prerequisite details to customer for SMS authentication .. Please do the needful..

Thanks

Muthukumar

[Muthukumar P]

Hi Team,

                      Can you help on this?

Thanks

Muthukumar

[nspasov]

Hi Muthukumar, have you checked the Lab Minutes videos? I always found them very useful:

http://www.labminutes.com/video/sec/ISE

Thank you for rating helpful posts!