ISE - WLC 7.2 VLAN assignment

[cpaquet]

Good evening,

The Wireless_Employees authorization profile,assign vlan 666 for wireless employees.

ISE is passing VLAN 666 to the WLC - see attachement Radius Auth-VLAN666.jpg

When I look on the WLC at a wireless employee who has successuflly connected to the network, WLC is still placing him in the pre-configured VLAN 7.

1. can VLAN be pushed from ISE to the WLC (code 7.2.103) for specific user session?

2. if so, any suggestions why it's not working for me.

Thank you.

Cath.

[Tarik Admani]

Hi,

Please check if an interface for vlan 666 exists on the controller. Also check if aaa override is enabled on the ssid.

[Tarik Admani · Accepted solution]

Cath,

Here is a guide that will help with dynamic vlan assignment on a WLC -

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#WLC

Thanks,

Tarik Admani
*Please rate helpful posts*

[cpaquet]

Great, Tarik.  You've answered my question.

Thank you.

Cath.