cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1019
Views
0
Helpful
1
Replies
Highlighted
Beginner

Local authentication and TACACS on ASA and Routers

If you have TACACS or Radius by default to telnet to a router or SSH to an ASA  is there a way to put a local username and use both TACACS and local at the same time?  I have only been able to use local authentication as a way of failover when Radius and TACACS servers are down.

Thanks,

Dave

1 REPLY 1
Highlighted
Cisco Employee

Unfortunately, that is not possible. You can only use local username and password when tacacs/radius server is down. In the presence of tacacs/radius server, you'll be prompted for tacacs/radius credentials all the time.

Regards,

Jatin

Do rate helpful posts-

~Jatin