08-28-2019 06:33 AM
Hello,
Is there a way to modify the Logging Level from AnyConnect NAM?
Customer is seeing a lot of logging messages (windows event viewer) from anyconnect. I also see that most of the messages are at debug level.
Solved! Go to Solution.
09-02-2019 10:52 PM
Hi,
It is a known issue that you can't control Anyconnect log level which generate a lot of logs.
I hope on the next version/build, we will have an option to disable debug logs on event viewer .
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuc67175/?reffering_site=dumpcr
08-28-2019 11:17 AM
Check out the following technote:
If you are using ISE, you can modify the Anyconnect posture profile to either enable or disable debug logs. It is one of the first options within the profile configuration window. See the attached picture.
09-02-2019 12:08 AM
Hi, they are not using the Anyconnect Posturing Agent at all. They are using Anyconnect NAM Module. Any other ideas?
09-02-2019 10:08 AM
Did you review the link that I had posted in the beginning of my response? It is here again:
08-28-2019 12:05 PM
09-02-2019 10:52 PM
Hi,
It is a known issue that you can't control Anyconnect log level which generate a lot of logs.
I hope on the next version/build, we will have an option to disable debug logs on event viewer .
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuc67175/?reffering_site=dumpcr
09-03-2019 08:53 AM - edited 09-03-2019 08:54 AM
please work with the Product managers, you can provide http://cs.co/ise-feedback and ac-mobile-feedback@cisco.com or write them on Social media (Twitter, FB)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: