04-04-2016 05:23 AM - edited 03-10-2019 11:38 PM
Hello,
I am trying to implement MAB on cisco C2960 switch with NPS as Radius server, but phones are not registering in VOICE VLAN. Instead they are automatically placed in DATA vlan, even though I have "switchport voice vlan 20" configured. These are GRANDSTREAM IP phones.
NPS server is configured with: cisco AV pair: device-traffic-class=voice as well as with Tunnel-Pvt-Group-ID=20.
I can't seem to figure out how to place the phone in correct VLAN. I tried numerous different approaches but still nothing.
Any help would be much appreciated !!
Here is the configuration:
show auth sessions int fa0/17
Interface: FastEthernet0/17
MAC Address: 000b.8273.af53
IP Address: Unknown
User-Name: 000b8273af53
Status: Authz Success
Domain: DATA
Oper host mode: multi-domain
Oper control dir: both
Authorized By: Authentication Server
Vlan Policy: N/A
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A2636020000002D0055D7A1
Acct Session ID: 0x0000002F
Handle: 0x7300002E
Runnable methods list:
Method State
mab Authc Success
interface FastEthernet0/17
switchport access vlan 40
switchport mode access
switchport voice vlan 20
switchport port-security maximum 2
switchport port-security
switchport port-security aging time 1
switchport port-security aging type inactivity
load-interval 60
authentication host-mode multi-domain
authentication port-control auto
authentication timer restart 30
authentication violation restrict
mab
no snmp trap link-status
dot1x pae authenticator
spanning-tree portfast
------------------------------------------------------------
show mac add int fa0/17
Mac Address Table
-------------------------------------------
Vlan Mac Address Type Ports
---- ----------- -------- -----
20 000b.8273.af53 DYNAMIC Drop
40 000b.8273.af53 STATIC Fa0/17
Total Mac Addresses for this criterion: 2
------------------------------------------------------------------
11-30-2016 11:41 AM
Hi,
I'm facing the same issue here in a client.
Have ever been fixed this problem?
TKS
04-02-2018 08:49 AM
Hello,
were you able to fix this ?
I'm in the same situation.
thx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide