01-27-2009 10:32 AM - edited 03-10-2019 04:18 PM
Is it possible to have muplitple Radius shell: AVPair entries for a single user/profile? I want to be able to use 'shell:priv-lvl=15' to manage our switches and 'shell:Admin=Admin default-domain' to manage our ACE's. What I am finding is that when I configure both I cannot get into our switches. Also is there a document that explains how cisco devices process the radius attributes? Thanks.
01-27-2009 12:56 PM
From an ACS and purely RADIUS perspective - yes this fine.
As to what the switch does - anyone's guess as this stuff is rarely documented. I've trawled CCO many times to find which cisco-av-pairs exist let alone which devices support them.
If you can get some low level AAA debug off the switch you might find what its doing with the av-pairs.
Good luck!
01-28-2009 10:29 AM
The switches were complaining about an unknown mandatory AV:
Jan 28 10:12:57.633 PST: AAA/AUTHOR/EXEC: received unknown mandatory AV: Admin=Admin default-domain
In order to resolve this I defined the AV as optional with a '*' instead of an '=':
shell:Admin*Admin default-domain
Thanks.
-Joshua
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide