Need guide to Configure PIX AAA Server

[tonny_ecmyy]

Hello there...

I'm having problem to configure the AAA server in my PIX506e, when i entered the following command, i can't access the firewall's pdm with correct password.

#aaa-server AuthPIX protocol tacacs+

#aaa-server AuthPIX (inside) host 192.168.1.2 TacacsKey

#aaa authentication http console AuthPIX

#privilege show level 10 command access-list

#privilege configure level 11 command access-list

#privilege clear level 12 command access-list

#username xxx password xxxx privilege xxx

#aaa authorization command LOCAL

#aaa-server AuthOut protocol tacacs+

#aaa-server AuthOut (inside) host 192.168.1.2 authkey

#aaa authentication include telnet outbound 0 0 0 0 AuthOut

#aaa authorization include http outbound 0 0 0 0 AuthOutbound

Here I've attach my configuration for your reference, Is there anything wrong with my config?

thanks for helping cisco beginner

Tonny

[umedryk]

You can search for the documentation at : www.cisco.com/techsupport -------> Guest ---------> Product Support ---------> Security and VPN ----------> Firewalls ----------->

You will be at http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Hardware:PIX&viewall=true

Here, you can search for the troubleshooting section