12-12-2017 06:14 AM
Hello,
A customer has asked if we have a maximum number of conditions that can be used within a profiling policies?
Thanks a lot
Solved! Go to Solution.
12-12-2017 06:56 AM
This is not in our ISE Performance & Scale page or recent searches. I will ask that our SME chyps provide his input as well. Unlikely they will reach a max or even go over the number of conditions that we have in our canned profiles with Medical NAC and other iOT devices.
12-12-2017 06:24 AM
Can they provide an example? They can post here as well
12-12-2017 06:46 AM
Thanks Jason, they are just asking after a detailed presentation on how profiles are created. I told them that most likely they will not need to create custom profiles, and even in that case, they will mostly not not have a lot of conditions (I would say no more than the workstation one).
They are just curious. Not a problem if it was not tested.
12-12-2017 06:56 AM
This is not in our ISE Performance & Scale page or recent searches. I will ask that our SME chyps provide his input as well. Unlikely they will reach a max or even go over the number of conditions that we have in our canned profiles with Medical NAC and other iOT devices.
12-12-2017 09:21 AM
The QA guidance we use for testing includes the following:
The Profiling Design Guide provides details on custom profile creation.
Craig
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide