Onboarding MAC 11 Big sur Issue

[craiglebutt]

Hi

Running 2.2 P17

Issues with on boarding MAC 11 Big Sur

Supplicant using is the latest one MacOSXSPWizard 3.1.0.1 updated 17/02/21.

On boarding a windows 10 device, works with no issues.

Getting screen splash

For MAC-11 or higher, install the profile manually as specified in ISE compatibility document. After installation, click OK

Did find CSCvv02998

cheers

[felix.heino2]

hi,

we are facing the same issue on some MAC clients.

Did you find an solution to this?

[felix.heino2]

Probly found the solution here: https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/compatibility_doc/b_ise_sdt_27.html#appleios

pple macOS
Table 14. Apple macOS
Client Machine Operating System

AnyConnect

Apple macOS 11

4.9.04043 or later

Apple macOS 10.15

4.8.01090 or later

Apple macOS 10.14

4.8.01090 or later

Apple macOS 10.13

4.8.01090 or later

Cisco ISE does work with earlier release of AnyConnect 4.x. However, only newer AnyConnect releases support newer features.

Note
For Apple macOS 11, you must use Cisco AnyConnect 4.9.04043 or above and MAC OSX compliance module 4.3.1466.4353 or above.

If you are using Apple macOS 11, you might see a prompt to install the profiles manually when you are installing the Cisco Network Setup Assistant. In this case, you must do the following:

Navigate to the Downloads folder.

Double-click the cisco802dot1xconfiguration.mobileconfig file.

Choose System > Preferences.

Click Profiles.

Install the profiles.

Click OK in the prompt that is displayed in the Cisco Network Setup Assistant to proceed with installation.