09-13-2004 04:41 AM - edited 03-10-2019 01:47 PM
Hello,
we are using a C3745 with 2 E1 PRI-Interfaces and
an ACS 3.2 for Radius authentication and accounting
for our dialout connects via ISDN.
We are searching for a possibility to account also
the src IP of the host which is responsible for the
setup of the dialout call via radius.
Is there a radius accounting attribute which can
be used for that?
btw:
In the debug dialer you can see the src and dest IP
which is the reason for the call setup, but
we dont want to use debug on the productive machines..
thx for help and suggestions in advance!
kind regards,
stefan
09-20-2004 08:14 AM
I thought that the source address was recorded. As per what I know, ACS will record the username, password, and source IP address in relation to each user. Am I missing anythiing?
09-20-2004 11:23 PM
Hello,
if you have a Dialin, the sourceIP is recorded,
but not for a Dialout afaik.
kind regards,
stefan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide