03-14-2012 12:50 PM - edited 03-10-2019 06:54 PM
I have radius configured to authentication a cisco switch. The ACS is V5.3. The login worked fine, but the enable doesn’t work. It came back saying “
22056 Subject not found in the applicable identity store(s). |
Any idea?
Thanks,
Han
Solved! Go to Solution.
03-28-2012 09:52 AM
Hi Han,
A first hint would be to check if the authentication protocol you are using (PAP, CHAP, MS-CHAPv1/2, etc.) is compatible with the database configured on ACS:
This table is from the ACS 4.2.1 configuration guide, but it is generally true for all types of databases and ACS versions.
Regards,
Fede
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
03-28-2012 09:52 AM
Hi Han,
A first hint would be to check if the authentication protocol you are using (PAP, CHAP, MS-CHAPv1/2, etc.) is compatible with the database configured on ACS:
This table is from the ACS 4.2.1 configuration guide, but it is generally true for all types of databases and ACS versions.
Regards,
Fede
--
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide