- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-08-2019 03:36 AM
Hi
Trying to setup iPSK but having issues not seeing the radius logs, they are not showing.
This is my lab, fresh install of 2.2 with patch 15.
I have seen there was an issue which required patch 4, but I'm guessing that bug fix is in patch 15 as well or do I need to install patch 4.
Compared all settings to live ISE.
The AAA is showing in logging, so doesn't need injecting.
cheers
Solved! Go to Solution.
- Labels:
-
Identity Services Engine (ISE)
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2019 10:55 AM
I would also recommend you open up a TAC case for this, the symptoms you mention indicate an underlying issue we very likely won't be able to solve on the forums.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2019 01:40 PM
For what it's worth, I've had similar issue in my ISE 2.3 deployments where the MnT stopped collecting data and the system health would shown unavailable for nodes. Rebooting the MnTnode fixes the issue, but haven't found a root cause yet.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-08-2019 06:58 AM
Are you seeing anything from the WLC in the ISE RADIUS live logs? If not, are you seeing any alarm on the dashboard for unknown NADs?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2019 12:56 AM
Just checked, not appearing in in Live Logs or Session Logs.
Does appear in Endpoints, and has profiled the 3 devices, also shows in active endpoints.
cheers
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2019 10:55 AM
I would also recommend you open up a TAC case for this, the symptoms you mention indicate an underlying issue we very likely won't be able to solve on the forums.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-09-2019 01:40 PM
For what it's worth, I've had similar issue in my ISE 2.3 deployments where the MnT stopped collecting data and the system health would shown unavailable for nodes. Rebooting the MnTnode fixes the issue, but haven't found a root cause yet.
