RDP to a Windows machine causes a disconnect with NAC enabled.

[network_geek1979]

Team,

We have a few Windows machine on our network. This machines are authenticated by adding their MAC address to a group on the Cisco ISE. With that having said these machines may also have the user certificates for the 802.1x authentication.

Now what happens is when a remote user RDP's to these machines the connection breaks and the reauthentication takes place. This causes end user issue.

Has anyone come across a similar issue and if yes any suggestions to get over this?
We use "User Authentication" in our network.

Regards,
N!!

[Flavio Miranda · Accepted solution]

Hi @network_geek1979 

 I have found this aticle from Microsoft that seems to discuss this problem.

https://learn.microsoft.com/en-us/troubleshoot/windows-client/remote/cannot-use-802dot1x-user-authentication-connect-rds