01-28-2019 11:42 PM
Hi All,
Is it possible to have second radius server configured on the switch for mab only?
We configured dot1x authentication from radius server on Win Server 2016.
And we want separate radius server for mab only on ACS 5.6.
Is it possible?
Thanks in advance.
Solved! Go to Solution.
01-28-2019 11:50 PM
Hi there,
In all my dot1x implementations I have only been able to use the default dotx1 group for authentication. Therefore this group is used for the entire authentication process on the switchport.
From your description why don't you use ACS as the main authentication server with the windows server used an identity store?
Cheers,
Seb.
01-28-2019 11:50 PM
Hi there,
In all my dot1x implementations I have only been able to use the default dotx1 group for authentication. Therefore this group is used for the entire authentication process on the switchport.
From your description why don't you use ACS as the main authentication server with the windows server used an identity store?
Cheers,
Seb.
01-29-2019 12:24 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide