I wonder if somone could advise me on the following:
I am trying to put the base patch on to ACS 5.7 runnin on 1121 hardware.
However even trying to configure the repository is failing but I noticed on boot I was getting a /tmp directory error
When I went in via CLI I noticed that the disk is full but I only have two devices configured on the ACS. Looking further I found that /tmp is taking up 37% of the space and /boot is taking up a further 38%
Can someone please give me a detailed explanation on how to fix this issue and how do I get to that directory and why is it so full plus how do I clear it ?
Thank you.
ACS01/# dir
Directory of disk:/
165669989 Jul 09 2015 06:10:56 acs-auto-upgrade-backup-150709-1008.tar.gpg
0 Jul 09 2015 06:08:53 acsRuntime.log
4096 Jul 09 2015 06:08:53 config/
16384 Oct 31 2011 09:02:03 lost+found/
634880 Jul 09 2015 05:55:52 tzdata2015a.tar
Usage for disk: filesystem
140736099399088 bytes total used
0 bytes free
4294967295 bytes available
ACS01/#
ACS01/# show disks
disk repository: 1% used (248672 of 65539868)
Internal filesystems:
/ : 4% used ( 271420 of 8063408)
/dev/shm : 0% used ( 0 of 2026464)
/altroot : 4% used ( 34100 of 1032088)
/boot : 38% used ( 35970 of 101086)
/home : 4% used ( 34208 of 1032088)
/opt : 2% used ( 5483168 of 362854908)
/recovery : 4% used ( 34100 of 1032088)
/storedconfig : 2% used ( 17788 of 1004052)
/storeddata : 1% used ( 42900 of 5063712)
/tmp : 37% used ( 2787612 of 8063408)
/usr : 10% used ( 726400 of 8063408)
/var : 14% used ( 1276988 of 10095152)
all internal filesystems have sufficient free space
ACS01/#
