04-25-2004 09:08 AM - edited 03-10-2019 07:46 AM
Can anyone please me with the aaa and radius debug below. My client cannot authenticate because of an unhandled error in the Reply-Messsage attribute and authentication terminates immedietly.
3d07h: RADIUS(00000884): Received from id 21662/9
3d07h: RADIUS/DECODE: Reply-Message fragments, 24+32, total 56 bytes
3d07h: As67 PPP/AAA: Check Attr: service-type
3d07h: As67 PPP/AAA: Check Attr: Framed-Protocol
3d07h: As67 PPP/AAA: Check Attr: addr-pool
3d07h: As67 PPP/AAA: Check Attr: reply-message
3d07h: As67 AAA/AUTHOR/LCP: Process Author
3d07h: As67 AAA/AUTHOR/LCP: Process Attr: reply-message
3d07h: AAA/AUTHOR: mandatory attribute 'reply-message' unhandled
3d07h: %ISDN-6-DISCONNECT: Interface Serial1/0:21 disconnected from
062243564 ,
call lasted 36 seconds
Nurudeen
04-30-2004 05:42 AM
Nurudeen,
AAA/AUTHOR: mandatory attribute 'reply-message' unhandled could appear because your RADIUS server is sending a "reply-message" attribute (usually used for displaying a welcome banner to dialup users) which can not be used by the router.
07-20-2004 09:31 AM
Nurudeen...did you get any _usable_ feedback to your question?
I have exactly the same problem when using a Cisco as NAS speaking to a RADIUS Server from RSA (ACE/Server). I have the feeling the problem is related to the IOS - I use 12.2.(13)T. Which IOS do you uye? Have you made success in solving the problem meanwhile?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide