11-12-2010 08:42 AM - edited 03-10-2019 05:34 PM
Hello friends, I want to upgrade a ACS 5.0 to a 5.1 and then to the 5.2 version but in the upgrading instructions there's a command line that I don't get, it is:
acs patch install patch-name.tar.gpg repository repository-name
I don´t know what is this repository-name and if it is a repository that I need to create. I can download the files for the installation (The patch and the ADE upgrade) but I don't know how to place them into the ACS appliance ( if that's the case).
Thanks in advance.
Atte. Jonás Díaz
Solved! Go to Solution.
11-12-2010 09:16 AM
Yep, you can re-image straight to 5.2 and set it up as if it were brand new.
Should be no issue applying a 5.0 license to 5.2.
11-12-2010 08:58 AM
Upgrading from 5.0 -> 5.1 does not use the 'acs patch install' command it requires reimaging to a new version and restoring a backup from the previous version (you will have to do it twice to get to 5.2):
So you will need to burn a couple DVDs and setup a repository on an FTP server so you can export your backups of your configuration. A repository can be setup via UI or CLI:
-Elly
11-12-2010 09:11 AM
Thanks for your answer but the device is brand new, I don't have any data stored...So I assume I can just intall the 5.2 version on the appliance but what happens with my ACS license if I do the upgrade from the 5.0 to the 5.2 version?...I have not even added the license to the ACS 5.0. Will the 5.0 license work with the upraded 5.2 version?.
Thanks in advance
Atte. Jonas Díaz
11-12-2010 09:16 AM
Yep, you can re-image straight to 5.2 and set it up as if it were brand new.
Should be no issue applying a 5.0 license to 5.2.
11-12-2010 09:17 AM
Thanks so much for your answer.
Atte. Jonás Díaz
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide