USG Guest with Cisco Wireless Controller

[AhmadZ]

Hi All, I want to know if Cisco Wireless Controller can work with USG for guest wifi. For example, I have SSID created on the Cisco Wireless Controller that I want to pass to the USG. So I want to use the USG for the guest SSID on the Cisco WLC along with the USG firewall capabilities.

Does this work?

Thanks in advance!

[ahollifield]

You mean the Ubiquiti product?  The wireless controller will terminate the SSID and then just layer2 VLAN to the USG correct?  No reason why this shouldn't work.  

[AhmadZ]

Yes the Unifi Security Gateway (Ubiquiti Product). I want to pass the SSID on the Cisco WLC to the USG Guest portal

[ahollifield]

No reason why this shouldn't work.  Drop the SSID onto a VLAN.  Make sure that VLAN is published to the USG with the layer3 on the USG.

[AhmadZ]

I have the VLAN created on the Cisco Coreswitch, and the SSID on the Cisco WLC is tagged with a VLAN ID. You mean that I should have the VLAN for the Guest SSID created on the USG and tag the SSID on the Cisco WLC with such VLAN?

[ahollifield]

Correct.  So assuming VLAN 2 here with an IP range of 10.10.2.0/24:

Cisco WLC---VLAN2--->Core Switch (no IP interface in VLAN2)----->VLAN2---->USG--->VLAN2/10.10.2.1