vpn authentication

[smailbouabdallah]

Hi,

I am using ASA 5520 for VPN remote access. How I tell ASA to use TACACS first then LDAP when authenticating VPN users.

Is there a command for that or how to do it using ASDM.

Thanks,

[Erick Delgado]

Hello,

I guest that what you want to configure is double authentication.

If this is the case this can be only done using anyconnect and not IPSEC.

Please see link below that will help you with this matter.

If you have any question feel free to contact me.

Erick Delgado

Cisco CSE

[andamani]

Hi,

The double authentication is not possible with  the Ipsec RA VPN.

We can configure the authentication  for the Anyconnect RA VPN.

you need to edit the connection Profile > Advanced on the ASDM. You will see a secondary authentication server configuration. You can configure the server here.

Hope this helps.

Regards,

Anisha

P.S.: please mark this thread as answered if you feel your query is resolved. Do rate helpful posts.